GoodWe Inverters

Goodwe Specifications and datasheet for all models 2019 here

NS Series (Single string)

  Single-Phase Single-MPPT – 1.5 kw to 3kw

• The Goodwe GW series are transformerless, single-phase inverters.
• Sizes from 1kw through to 3kw
• They operate without a fan, with housings featuring IP 65 protection, and a very wide temperature range.
• They can be installed at practically any location the user likes, and the display and communication options are good.
• The efficiency is at a consistently high level; its power loss is quite low, and the MPPT voltage has very little impact on it.

GoodWe-NS-series specifications

GoodWe NS User Manual 

D-NS Series (Dual string)

 Single-phase, Dual MPPT for installing two different sets of solar panels – 3kw – 5 kw

GoodWe D-NS inverter series come in 3kW, 3.6kW, 4.2kW and 5kW options.

With low start-up voltage of only 120V and the widest voltage range of 80 – 550V, these inverters are built for complex installations and give your solar installation/designer greater installation options for your system.    The GoodWe D-NS series is also extremely light – weighing in at just 14kgs they are 30% lighter than other inverters.    Furthermore, with optional Wi-Fi and a 97.8% max efficiency, the GoodWe inverter has been a popular solar inverter in Australia.

While this is one of the best-priced inverters on the market, you may be surprised at the quality of the workmanship and components which are immediately recognisable as quality components from the top electronic manufacturers in the world.

GoodWe D-NS-series specifications here

Goodwe-NS-DNS-SERIES-User-Manual

The GoodWe can be installed both indoors and outdoors in warm locations.  Because its cooling system does not feature a fan, it is also relatively impervious to dust.   The efficiency curve only exhibits a very low dependency on the MPPT voltage and reaches a peak value of 97.8%.  Because the efficiency declines very little over virtually the entire operating range, the GW4000-SS has attained a PHOTON efficiency of 96.9% for medium irradiation and 97.1% for high irradiation.    This translates into two »A« grades and lands the company a place among the top 10 inverters tested so far in the power class of up to 5 kW.

DT series (Three Phase)

  3-phase inverters for commercial applications – 10-25 kW

GoodWe DT series inverters adopt cutting-edge technology in photovoltaic fields.

Higher conversion efficiency and lower energy losses are guaranteed to maximize customer satisfaction.

With its reliable power grid support management and high protective class, the DT series is compatible with different types of branded solar panels and is also ideal for commercial rooftop systems.   This safe and reliable series is the first choice for residential, commercial installations and power plants.

GoodWe DT series datasheet

ES5048 Hybrid Inverter (Single phase)

  True hybrid in one package – ideal for power cost reduction and battery back-up.

A wonderful and economic choice for those wanting a reliable battery back-up solar system, and a reliable grid-connected inverter in one.   

Supplies up to 4.6 kw to the back-up loads directly from the batteries, with or without the grid operating.  

Install up to 5.5 kw of solar panels to run the house, charge your batteries, and export the rest, in that order.  

At nightfall, the house runs from the batteries first, to save buying power from the grid, and then the batteries are recharged from your solar panels the next day.    For excessive loads on the batteries, the grid will supplement the battery power.   

The system is capable of having switched loads, and grid-only loads, so you can decide how you want to run your household power supply.

Customers have acclaimed the benefits they have seen from installing this system.  Comes complete with wifi, so you can check what is happening at any time on your smart phone app, or via a modem and the internet.

See more details, including training videos, of the ES5048 here:

EM5048 Hybrid Inverter (Single phase)

The Goodwe Hybrid  GW5048-EM 5kw 48V inverter, can work in on-grid and off-grid situations.  The Goodwe EM solar inverter is compatible with 48V lead-acid and lithium batteries.    Is compatible with LG Chem RESU 48V lithium batteries.   Ideal to boost self-consumption in residential homes, it charges the surplus energy from the solar panels into the batteries for later use.  Zero injection to the electricity grid can be set using the EzMeter.   Monitoring with mobile App, and via an internet connection.

Goodwe Specifications and datasheet 2019

ET Series Hybrid Inverters (Three phase)

The brand new ET Series from GoodWe is a three-phase high voltage energy storage inverter that enables enhanced energy independence and maximizes self-consumption through export limit feature and time of use shifts for reduced electric bills. Covering a power range of 5 kW, 6 kW, 8 kW and 10 kW, the ET Series allows up to 10% overloading to maximize power output and features Uninterruptible Power Supply (UPS) to inductive loads such as air conditioners or refrigerators with an automatic switchover time of less than 10 milliseconds, providing grid-tied savings when the grid is up and off-grid independence and security when it is down or compromised.

ET Series (Aus) Three-phase Energy Storage Inverter Specifications

Model:	GW5KL-ET	GW6KL-ET	GW8KL-ET	GW10KL-ET
Battery Type	Li-Ion	Li-Ion	Li-Ion	Li-Ion
Battery Voltage Range (V)	180~600	180~600	180~600	180~600
Max. Charging Current (A)	25	25	25	25
Max. Discharging Current (A)	25	25	25	25
Charging Strategy for Li-Ion Battery	Self-adaption to BMS	Self-adaption to BMS	Self-adaption to BMS	Self-adaption to BMS

SBP AC-coupled battery storage retrofit 

 Easily convert any existing solar power system to a battery back-up solar system.  The GoodWe SBP AC-coupled battery storage retrofit solution is applicable for both single-phase and three-phase systems. During the day, the PV system generates electricity which will be firstly provided to the loads. Then, the excess energy will charge the battery via the SBP energy storage inverter.  The electricity stored can be released when the loads require it.  The battery can also be charged by the grid to ensure uninterrupted supply in the event of a power cut.

The GoodWe SBP series DC-coupled battery storage retrofit device is compatible with most single phase on grid inverters.   Almost any existing solar power system can be upgraded to a solar energy storage system, with the addition of the SBP retrofit device.    During the daytime, the solar power system generates electricity which is firstly provided to the loads.    Then any excess energy will charge the battery via the SBP retrofit device.   During the night, the battery discharges via the SBP retrofit device, and electricity will be provided to the loads via the existing inverter.   The GoodWe SBP series greatly improves the self-consumption ratio of your solar power system.

The SBP Series from GoodWe is a retrofit battery management system which offers PV plant owners the opportunity to integrate a battery storage solution to their existing installation.
Compatible with most brands of single phase on-grid inverters, the SBP intelligently manages the PV yield of a system allowing generated electricity to be directed within the home, fed to the grid or used to charge a battery storage device.
Electricity stored within batteries can be released when domestic loads are high but PV generation is not possible, helping to synchronise energy production and consumption.
The SBP Series offers installers the opportunity to improve existing PV systems for customers with the prospect of increase self-consumption and reduced reliance on grid-supplied electricity.

Key Features:

• A retrofit system which is compatible with most current grid-interactive installations
• Intelligent battery management function
• Compatible with both Lead-Acid and Lithium-Ion battery storage devices
• Optimised energy usage through increased self-consumption
• Monitor performance through GoodWe EzViewer

Technical Data:

• Max. DC Input: 6kw
• Max. Input Voltage: 600v
• Rated Power: 2500w
• Rated Output Voltage: 360v
• Battery Type: Lead-Acid or Li-Ion
• Nominal Battery Voltage: 48v
• Max. Discharge Power: 2500w
• Max. Battery Charge Power: 2500w
• Charging Curve: 3-Stage Adaptive with Maintenance
• Max. Charge / Discharge Efficiency : 96.0% / >96.5%
• Protection: IP65
• Dimensions : 344 x 275 x 128mm
• DC Terminals: MC4
• Warranty: 5 years

GoodWe-SBP-AC-Charger-datasheet

Goodwe EZ-meters

Goodwe-ez-meter-single phase

Goodwe-ez-meter-3 phase

GoodWe internet and wifi communications details here.

GoodWe 5 year Warranty information and warranty extension.

Order online now, or ask a question:

Queensland:    (07) 5448 8304      qld @ solazone.com.au

Victoria:            (03) 9808 7337      vic @ solazone.com.au

or use this form: